To Foam or not to Foam – lets talk dog wheelchair tires

Because in part an interior designer is an artist,many people believe there is some kind of mystery about hiring one. And in part,that’s true. People go to an interior designer because they have great skill in helping design a unique place for them to live.

However,unlike hiring an artist like the mysterious Bansky,who at one time sold art direct to the public,or David Hockney or Jeff Koons,an interior designer produces a different type of art,one that is collaborative in general.

Rather than hiring a designer,writing a check,and just letting them work,interior stylists meet with a client and intensely listen to their desires for the planning of the space they want to live in.

Therefore,most designers agree that the number one tip for hiring a designer is to see if they as clients and the designer click.

Sometimes,clients come to a designer and don’t know exactly what they want,but through close questioning,the designer will slowly draw that out of them.

Often,it’s enough just to know what the client does not want in particular.

Consider the rule of three!

Two designers,Ariel Okin and Christine Markatos Lowe suggest that you meet with no more than three designers. They agree that limiting the amount to three or less,will make the right designer pop-up from those interviewed. More than that,and confusion,
reigns.

Find a designer you trust

Ariel Okin says that meeting a designer is a bit like dating in that the client needs to put in a lot of work and ask the right questions. The object he says is to find a designer you trust. When there is great trust,then the client,once he has expressed his or her wishes,allows the designer to have a sense of freedom to design the interior,and it is much more fun for the client.

Come prepared to meet the designer

It’s generally agreed that if the client comes to a meeting with images and photographs of ideas they really like,that the client and the designer will quickly come to a general agreement on what is needed.

The second time the designer and the client meet,the designer should then bring preliminary sketches of what he or she has envisioned the client wants and yet allows for the artistic expression of the designer.

Be completely trasparent about your budget

An important part of the client-designer relationship is to be completely open from the start on your budget. You don’t need to pin it down to an exact dollar amount,but the designer needs to know a range you are willing to spend.

Finally,go with your gut

Check references,and do all the normal things when hiring a designer,but in the end,follow your gut to find the best results.

In Hong Kong,many clients have chosen Dots and Tots at https://www.dotsntots.com.sg/ because when meeting their designers,they have found that Dots N Tots meets all the requirements of a good designer.

If you own a commercial or industrial property, you know that keeping it operational and secure is critical. Proper maintenance and upkeep can extend the useful life of your building, reduce operating costs, and prevent unnecessary wear and tear on your property. Keeping your building watertight is just as important. Suppose your building needs access to an exterior sewer line for disposal. In that case, it will eventually fill with water and require repair or replacement.

Hydro jetting Sewer Line Repair and Replacement (SLLRR) technology is essential here. This blog will explain what hydro jetting is, its advantages over traditional sewer line repair methods, and give you tips on how to get the most from this affordable alternative to SLLRR. Check out another interesting site here, Morningside Plumbing. Let us dive in!

What is Hydro Jetting?

Hydro jetting is a method of repairing or replacing water and sewer lines using pressurized water. The water is injected into the line using a machine that resembles a high-pressure hose gun. The force of the water breaks up the existing pipe, loosening debris and debris inside the line. Once the line is clear of debris, the new pipe is fitted and sealed, with no need for excavation or earthmoving. One of the most popular services for hydro jetting is sewer line repairs. City sewer lines are typically plastic, steel, or cast iron. Because hydro jetting works by breaking up the line and clearing it of debris, the repaired line can be reused rather than replaced. That can result in significant cost savings if the line damage is beyond repair. Find out more here Morningside Plumbing.

Cost-Effective Alternative To Sewer Line Repair And Replacement

Sewer line removal and replacement can be expensive, both in terms of the cost of replacement and the disruption to your operations. Hydro jetting is a cost-effective alternative to this method. If the damaged portion of the sewer line is minor or the line is clearable, hydro jetting can clean the line, and then the pipe can be reused. Another option is digging a deep trench and using epoxy liners to line the trench while replacing the pipe. Again, this method is expensive but the most cost-effective solution eventually.

Do I Need Sewer Line Repair Or Replacement?

For many commercial and industrial properties, a sewer line repair is the only option when the sewer leaks. The line must be dug up and a licensed sewer repair contractor must repair or replace it. And that is often a costly, disruptive process that can take a long time to complete. Sometimes, the only option is replacing the sewer line, which may not be ideal. If the damaged portion of the sewer is small, or if clearing the line is possible, jetting is usually the best option. Read more morningsideplumbing.com/.

However, if you have a severely damaged sewer line, you will need to replace the line. You may not need to dig up your property if you can hire a trenchless sewer line replacement expert. There are a few local plumbers that offer trenchless line replacement services. Have a professional technician inspect the sewer line for damage and recommend solutions for you.

Are garden log cabins waterproof is a query we got asked all the time here at timberdise garden log cabins .

The concise simple answer to your query is an unquestionable yes!

Why would they not be?

Well, let’s take a look at some of the conceivable troubles with a timber cabin which would make the log cabin not waterproof and fairly frankly not fit for purpose.The main thing to look at as soon as possible is the roof, that’s where you would imagine the main problem would commence (this is not always the scenario but that’s where we will commence today). The main problem with the roof would be to have the felt or roof shingles to not be placed successfully. This is fairly easily done if this is something you have never done before and why it should always be carried out by a professional most especially if you are putting in a lot of your hard earned money on a timber cabin.

• Make sure that the overlies are overliing in the correct way. You should always commence felting at the bottom of the building and felt upwards. By doing this you ensure that the felt overlies on top of the piece of felt that is further down the roof. This will ensure there is a natural run off of the water, if you commence felting at the top of the roof and you put the overlie from the bottom pieces over the top of the felt higher up when the rain works off it will operate underneath the felt and consequently trigger a water leak. This is just exactly the same when doing shingles, make sure you mount from bottom upwards.

• Make sure the overlies of the felt/shingles are fairly generous. You don’t want them to be just barely overliing because this could trigger rain to get between the felt sheets and this will trigger a water leak

• Make sure you use more than enough felt nails. Ideally you want to be spacing the felt nails around 6 inches apart from each other. Always do this on both sides of the felt and dependent on the quality of the felt you are using possibly put another row of nails in the middle,possibly two rows but again this depends on the quality of the felt. Failure to put enough felt nails in there could result in the felt blowing off during a bad storm which would then leave your building exposed to leakages.

• It is in addition vital that when you reach the overhang of the building with the felt you tack the felt to side of the roof but DO NOT tuck the felt underneath the overhang of the roof as this limits the natural run off of the water. This can trigger early rotting of the building and in some cases trigger the roof to water leak around the top corners of the building as water could build up.

• Make sure you use the correct size fixings. If the roofing boards on your building are let’s say 10mm, you don’t want felt nails of 16mm. Doing this would trigger the felt nails to come completely through the roof. This would not look cosmetically pleasing and would in addition be a real chance of a water leak in the building. They way felt is now designed,there should be a watertight seal around the nail but throughout the seasons with wear and tear this may fail resulting in a water leak.

• The most frequently ignored area on a timber cabin building is the felt or shingles on the roof. This is primarily because we can’t see it most of the time and it’s a lot more difficult to get up there and have a look,but this is just exactly what you should do and I would strongly recommend at least once a year or if you notice a water leak. Because log cabins are not built as high as the normal house and the felt and shingles aren’t fairly as tough and resilient as a typical house tile they require a little more focus. They are exposed to more elements on a daily basis because they are lower, this can result in a number of things from falling debris from plants, or another good example would be a children’s toys getting thrown up there which would all trigger harm to the felt/shingles. Not to mention lots of bird droppings can rot the felt if it is in an area where natural rain can not penetrate it to create a natural run off and cleaning system (for good example if your log cabin sits under a tree).

timberdise garden log cabins mount all of our log cabins, we do this because we know you are investing a lot of money into a timber cabin and you want it to be around for a long period of time. So the best way we can ensure this happens is to take care of the installation and make sure it is placed successfully. We’ve been out to repair log cabins in the past built by non-skilled people and if the building is not put together successfully then number one it won’t be safe but in addition it could trigger a failure in the building to be waterproof.

A prime good example of this would be that the timbers haven’t been built successfully on the walls. This would then trigger the log cabin to differ from the design as it was intended to be. At this point when the roof was placed there might be spaces between the roof and the wall. Openings could in addition appear on the walls of the log cabins themselves and in some situations if the initial build of the log cabin was so bad you would have no choice but to take down the log cabin and reconstruct it.

This is why timberdise garden log cabins mount all of our log cabins so you don’t have this to worry about. As you can imagine if there is a space in the wall or a space between the roof and the wall this would leave the cabin open and it would most definitely water leak which is what we want to avoid at all costs.

I in addition want to bring focus to the floor covering a second. Having your log cabin placed on a proper ground base is a must. That could be a Timberdise ground base,cement base or a paved area. As long as they’re flat, level and solid you should be ok. Be mindful of where you put the cabin,don’t put it anyplace that is at risk of flooding as just like the house that you live in. If the water level rises and there is no getaway for it then the log cabin will flood,that is regardless of how thick and tight your timbers are.

Lastly let’s talk about sealants around the windows and doors. Make sure after you have treated your cabin you fit the relevant sealants around the doors and the windows. The cabins don’t come with these fitted as standard, this is so you can treat the cabin first and then apply the sealants afterwards. By not fitting the doors and windows with sealants then there’s a chance rain could penetrate the inside of the cabin, which again is easily fixed by applying sealants.

Additionally, at times most especially during the winter months, condensation can happen inside a log cabin. This is normal due to the cabins not having any insulation fitted, it is not a water leak and can be fairly normal. We advise at Timberdise to get a dehumidifier if you have electric access in there and leave it operating during the cooler months. This will help take moisture content out of the air and further increase the life-span of your cabin.

If you stick to all the above ideas you should have a water leak free cabin for the duration of its life-span which can supply indefinite enjoyment and relaxation. Don’t forget prevention is much better than the treatment.